CONSTRUCTION | |
Conductor: | - Annealed bare copper - Compact, Class B stranding |
Grounding Conductor(s): | - 1-3 bare or covered grounding copper conductors may be supplied in the twisted assembly upon request |
Extruded Insulation Shield (EIS): | - Thermoset semi-conducting polymeric layer free stripping from insulation |
Insulation: | - Ethylene Propylene Rubber (EPR), colored to contrast with the black conducting shield layers |
Metallic Shield: | - 5 mils annealed copper tape with an overlap of 25% |
Jacket: | - Flame-retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC) |
Applications:
- Suitable for use in a broad range of commercial, industrial, and utility applications, where reliability is the major concern, space is limited, and ease of installation is critical
- Suitable for use in wet or dry locations when installed in accordance with the NEC
- For use in aerial, direct burial, conduit, open tray, and undergound duct installations
Features:
- Suitable for use in wet or dry locations when installed in accordance with the NEC
- For use in aerial, direct burial, conduit, open tray, and undergound duct installations
- UL Listed as Type MV-105 for use in accordance with the NEC
- UL labelled and marked "Sunlight Resistant For CT Use"
- Compact twisted assembly offers ease of installation and lower voltage drop characteristics as compared to multiple single conductor systems
Temperature Ratings:
- Normal: 105°C
- Emergency: 140°C
- Short Circuit: 250°C
Standards:
- UL labelled and marked "Sunlight Resistant For CT Use"
- Compact twisted assembly offers ease of installation and lower voltage drop characteristics as compared to multiple single conductor systems
Temperature Ratings:
- Normal: 105°C
- Emergency: 140°C
- Short Circuit: 250°C
- ICEA S-93-639/NEMA WC74 (formerly ICEA S-68-516/NEMA WC8)
- AEIC CS8 (formerly AEIC CS6)
- AEIC CS8 (formerly AEIC CS6)
Part # | AWG | No. of Strands | Nominal Thickness | Ground Cond. Size | Nominal O.D. | Lbs./M’ | Splices Available | Terminations Available | |
Insulation | Jacket | ||||||||
1MVE30203 | 2 | 7 | .220” | .110” | 6 | 2.04” | 2226 | Cold-Heat | Cold In/Out Heat In/Out |
11MVE31/003 | 1/0 | 19 | .220” | .110” | 4 | 2.20” | 2811 | Cold-Heat | Cold In/Out Heat In/Out |
1MVE32/003 | 2/0 | 19 | .220” | .110” | 4 | 2.30” | 3163 | Cold-Heat | Cold In/Out Heat In/Out |
1MVE34/003 | 4/0 | 19 | .220” | .110” | 3 | 2.52” | 4203 | Cold-Heat | Cold In/Out Heat In/Out |
1MVE325003 | 250 | 37 | .220” | .110” | 3 | 2.66” | 4775 | - | - |
1MVE335003 | 350 | 37 | .220” | .140” | 2 | 2.94” | 6182 | Cold-Heat | Cold In/Out Heat In/Out |
1MVE350003 | 500 | 37 | .220” | .140” | 1 | 3.21” | 7686 | Cold-Heat | Cold In/Out Heat In/Out |
1MVE375003 | 750 | 61 | .220” | .140” | 1/0 | 3.61” | 10,978 | - | - |