CONSTRUCTION | |
Conductor: | - Annealed bare copper - Compact, Class B stranding |
Extruded Strand Shield (ESS): | - Extruded thermoset semi-conducting stress control layer over conductor |
Insulation: | - Ethylene Propylene Rubber (EPR), colored to contrast with the black conducting shield layers |
Extruded Insulation Shield (EIS): | - Thermoset semi-conducting polymeric layer free stripping from insulation |
Metallic Shield: | - Helically Applied Tape Shield - 5 mils annealed copper tape with an overlap of 25% |
Jacket: | - Flame-retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC) |
Applications:
- Suitable for use in power circuits up to 5kV when installed in open air, conduit, duct, or buried direct in earth, for wet or dry locations
- Used for power applications in chemical plants, refineries, steel mills, industrial plants, and utility substations and generating stations
Features:
- Used for power applications in chemical plants, refineries, steel mills, industrial plants, and utility substations and generating stations
- Temperature Ratings:
- Normal: 105°C
- Emergency: 140°C
- Short Circuit: 250°C
- UL Listed as Type MV-105 for use in accordance with the NEC
- Sizes 1/0 AWG and larger are listed and marked "Sunlight Resistant For CT Use" in accordance with the NEC
Standards:
- Normal: 105°C
- Emergency: 140°C
- Short Circuit: 250°C
- UL Listed as Type MV-105 for use in accordance with the NEC
- Sizes 1/0 AWG and larger are listed and marked "Sunlight Resistant For CT Use" in accordance with the NEC
- ICEA S-93-639/NEMA WC74 (formerly ICEA-S-68-516/NEMA WC8)
- AEIC CS8 (formerly AEIC CS6)
- AEIC CS8 (formerly AEIC CS6)
Part # | AWG Size | Num. of Strands | Nominal Thickness | Diameter Over Ins. | Nom. O.D. | Lbs./M’ | Splices Available | Terminations Available | |
Insulation | Jacket | ||||||||
1MVE20601 | 6 | 7 | .115” | .060” | .440” | .650” | 295 | - | - |
1MVE20401 | 4 | 7 | .115” | .060” | .480” | .700” | 365 | Cold-Heat | Heat |
1MVE20201 | 2 | 7 | .115” | .060” | .540” | .750” | 469 | Cold-Heat | Cold-Heat |
1MVE20101 | 1 | 19 | .115” | .060” | .580” | .790” | 541 | - | - |
1MVE21/001 | 1/0 | 19 | .115” | .060” | .610” | .820” | 623 | Cold-Heat | Cold-Heat |
1MVE22/001 | 2/0 | 19 | .115” | .060” | .660” | .870” | 737 | Cold-Heat | Cold-Heat |
1MVE23/001 | 3/0 | 19 | .115” | .080” | .710” | .960” | 907 | - | - |
1MVE24/001 | 4/0 | 19 | .115” | .080” | .760” | 1.01” | 1072 | Cold-Heat | Cold-Heat |
1MVE225001 | 250 | 37 | .115” | .080” | .810” | 1.07” | 1228 | Cold-Heat | Cold-Heat |
1MVE235001 | 350 | 37 | .115” | .080” | .910” | 1.17” | 1595 | Cold-Heat | Cold-Heat |
1MVE250001 | 500 | 37 | .115” | .080” | 1.03” | 1.32” | 2158 | Cold-Heat | Cold-Heat |
1MVE275001 | 750 | 61 | .115” | .080” | 1.22” | 1.51” | 3062 | Cold-Heat | Cold-Heat |
1MVE2100001 | 1000 | 61 | .115” | .080” | 1.37” | 1.67” | 3940 | - | - |