ARMORED CABLE, Aluminum Interlocked Armor
90°C - 600 Volt
UL Type MC


CONSTRUCTION
Conductor: - Stranded, bare copper in accordance with ASTM B3 and B8
Insulation: - Cross-linked polyethylene type XHHW-2 per UL44
Ground Wire: - Class B stranded bare copper in accordance with ASTM B3 and B8
Assembly: - Conductors are cabled with suitable fillers and bare copper ground conductor
- Cable core is covered with binder tape
Armor: - Aluminum interlocked armor
Color Code Chart 107 (Y11203A & Y11003A):
Cond. Num. Color Cond. Num. Color
1 Black 2 Red
3 Blue 4 Orange
5 Yellow 6 Brown
7 Red w/ Black Stripe 8 Blue w/ Black Stripe
9 Orange w/ Black Stripe 10 Yellow w/ Black Stripe
11 Brown w/ Black Stripe 12 Black w/ Red Stripe
Color Code Chart 108 (All Others):
Cond. Num. Cond. Marking Cond. Num. Cond. Marking
1 "1" One 2 "2" Two
3 "3" Three 4 "4" Four
Jacket: - Flame and sunlight resistant black PVC jacket
Standards:
- UL 1569, UL 44, UL 1581, UL Type MC-600 volts
- ICEA S-95-658/NEMA WC 70, ICEA T-29-520
- NEC Type XHHW-2 conductors
- IEEE 383, IEEE 1202
- Meets EPA 40 CFR part 261
- OSHA acceptable, NEC
Applications:
- Designed for use on power or control circuits
- Can be installed in cable tray, wire ways, racks, or buried directly
- Permitted for use in Class I, Division II and Class II, Division II per NEC
Part # AWG Size No. of Cond. Nom. Insul. Thick. Ground Wire Size Nom. O.D. Lbs./M’ Ampacity* 40°C Ambient Recommend Fitting
Armor Overall
Y11203A 12 3 .030” 12 .54” .65” 215 –   STE050
1Y11003A 10 3 .030” 10 .61” .73” 300 – STE050
1Y10803A 8 3 .045” 10 .75” .85” 410 55 STE050
1Y10603A 6 3 .045” 8 .83” .93” 551 75 STE075
1Y10403A 4 3 .045” 8 .92” 1.03” 727 95 STE100
Y10203A 2 3 .045” 6 1.05” 1.15” 1050 130 STE125
1Y10103A 1 3 .055” 6 1.23” 1.33” 1283 150 STE125
1Y11/003A 1/0 3 .055” 6 1.33” 1.43” 1553 170 STE125
1Y12/003A 2/0 3 .055” 6 1.43” 1.53” 1859 195 STE150
1Y13/003A 3/0 3 .055” 4 1.55” 1.67” 2314 225 STE150
1Y14/003A 4/0 3 .055” 4 1.67” 1.79” 2781 260 STE150
1Y125003A 250 3 .065” 4 1.81” 1.93” 3356 290 STE200
1Y135003A 350 3 .065” 3 2.05” 2.17” 4485 350 STE200
1Y150003A 500 3 .065” 2 2.33” 2.48” 6204 430 STE250
1Y160003A 600 3 .080” 2 2.57” 2.72” 7321 475 STE300
1Y175003A 750 3 .080” 1 2.85” 3.00” 9062 535 STE300
Note: The information in this specification sheet is approximate and subject to standard industry and manufacturer tolerances. Please verify specific requirements with your Omni Cable account manager.
*Ampacity per NEC Table 310-16