ARMORED CABLE, Continuous Corrugated Armor
90°C - 600 Volt
UL Type MC-HL
Cable Tray Use, Sunlight Resistant, Direct Burial, UL Marine Shipboard Cable, ABS CWCMC


CONSTRUCTION
Conductor: - Bare, annealed copper conforming to ASTM B-3 and stranded in accordance with ASTM B8
Insulation: - Cross-linked polyethylene type XHHW-2 per UL 44
Grounding Conductor: - Class B stranded bare copper per ASTM B3 and B8
- Cross-linked polyethylene (XLPE) insulation, green
- Sized in accordance with NEC Table 250.122
Assembly: - Conductors are cabled in concentric layers with grounding wire, interstices are filled with suitable non-hygroscopic fillers, as required.
- A binder tape of synthetic material assembles the core in an essentially round configuration.
Armor: - Continuous corrugated aluminum sheath 99.5% is applied over the assembly. The continuous sheath will be impervious to moisture, liquids, and gases.
Color Code ICEA Method 1, Table E2:
Cond. Num. Color Cond. Num. Color
1 Black 2 Red
3 Blue 4 Orange
5 Yellow 6 Brown
7 Red w/ Black Stripe 8 Blue w/ Black Stripe
9 Orange w/ Black Stripe 10 Yellow w/ Black Stripe
11 Brown w/ Black Stripe 12 Black w/ Red Stripe
13 Blue w/ Red Stripe 14 Orange w/ Red Stripe
15 Yellow w/ Red Stripe 16 Brown w/ Red Stripe
17 Black w/ Blue Stripe 18 Red w/ Blue Stripe
19 Orange w/ Blue Stripe 20 Yellow w/ Blue Stripe
21 Brown w/ Blue Stripe 22 Black w/ Orange Stripe
23 Red w/ Orange Stripe 24 Blue w/ Orange Stripe
25 Yellow w/ Orange Stripe 26 Brown w/ Orange Stripe
27 Black w/ Yellow Stripe 28 Red w/ Yellow Stripe
29 Blue w/ Yellow Stripe 30 Orange w/ Yellow Stripe
31 Brown w/ Yellow Stripe 32 Black w/ Brown Stripe
33 Red w/ Brown Stripe 34 Blue w/ Brown Stripe
35 Orange w/ Brown Stripe 36 Yellow w/ Brown Stripe
Jacket: - Black polyvinyl chloride (PVC), sunlight and oil resistant, per UL 1569, 90°C temperature rating.
Applications:
- Designed for use on power or control circuits
- Can be installed in cable tray, wire ways, racks, or buried directly
- Suitable for exposure to hazardous locations, Type MC-HL for Classes I, II, and III Division 1 and 2
Standards:
- UL 44, XHHW-2 600 Volt conductors
- UL 1569 Type MC and UL 2225 Type MC-HL
- Designated Type MC as per NEC Article 334
- Passes UL and IEEE 383 vertical tray fire tests at 70,000 BTU/hr, ICEA T-29-520 fire test at 210,000 BTU/hr, IEC 332-3 category A fire test, IEEE 1202, and CSA FT4
Part # AWG Size No. of Cond. Grd. Size Nom. O.D. Lbs./M’ Recommended Fitting
Armor Overall
1X11403 14 3 14 .530” .640” 192   STX050464
1X11404 14 4 14 .580” .690” 222   STX050464
1X11405 14 5 14 .600” .710” 245   STEX075
1X11406 14 6 14 .620” .730” 267   STEX075
1X11408 14 8 14 .710” .820” 321   STEX100
1X11409 14 9 14 .740” .850” 377   STEX100
1X11411 14 11 14 .800” .910” 395   STEX100
1X11418 14 18 14 .930” 1.04” 554   STEX100
1X11436 14 36 14 1.24” 1.35” 948   STEX100
1X11437 14 37 14 1.22” 1.32” 1030   STEX125
1X11202 12 2 12 .530” .640” 200   STX050464
1X11203 12 3 12 .580” .690” 239   STX050464
1X11204 12 4 12 .670” .780” 310   STX050464
1X11205 12 5 12 .670” .780” 324   STX050464
1X11206 12 6 12 .670” .780” 338   STX050464
1X11207 12 7 12 .710” .820” 408   STX050464
1X11208 12 8 12 .800” .910” 426   STEX100
1X11211 12 11 12 .890” 1.00” 519   STEX100
1X11212 12 12 12 .885” .995” 584   STEX100
1X11218 12 18 12 1.02” 1.13” 739   STEX100
1X11236 12 36 12 1.37” 1.48” 1302   STEX150
1X11002 10 2 10 .580” .690” 253   STX050464
1X11003 10 3 10 .620” .730” 303   STX050464
1X11004 10 4 10 .670” .780” 348   STEX075
X11006 10 6 10 .750” .860” 451   STEX075
1X11008 10 8 10 .890” 1.00” 568   STEX075
1X11011 10 11 10 .970” 1.08” 704   STEX100
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.
*Ampacities are in accordance with Table 310-16 of NEC.