| CONSTRUCTION | |||||||||||||
| Conductor: | - Annealed stranded bare copper. | ||||||||||||
| Insulation: | - Cross linked Polyethylene. - Insulation shielded with extruded semi-conducting compound bare copper tape |
||||||||||||
| Grounding: | - 2 ground wires - Ground wires are class B strands uninsulated, annealed stranded bare copper - Ground check has annealed stranded bare copper, separator, and yellow XLP insulation |
||||||||||||
| Color Code Chart 2: |
|
||||||||||||
| Assembly: | - Polypropylene fillers as needed and cabled in a helical configuration - A mylar binder tape is applied over the assembly | ||||||||||||
Applications:
Standards:
- Designed for use in high voltage distribution circuits for permanent (or semi-portable) installations in bore holes, shafts, open pits, strip mines, and tunnels
- MSHA Approved (P-136-MSHA)
- Passes MSHA flame test
- Meets ICEA requirements
- UL listed under file no. E18966
- OSHA acceptable
- Built with flame retardant components
- Excellent heat and moisture resistance
- Resistant to most oils and chemicals
| Part # | AWG Size | No. of Cond. | Stranding | Grd. Cond. AWG | Grd. Check AWG | Nom. Insul. Thick. | Nom. O.D. | Lbs./M”“ | Recommended Fitting |
| 1B450203 | 2 | 3 | 7 | 6 | 8 | .175” | 1.875” | 2117 | TB2584K |
| 1B450103 | 1 | 3 | 19 | 5 | 8 | .175” | 1.941” | 2477 | TB2585K |
| 1B451/003 | 1/0 | 3 | 19 | 4 | 8 | .175” | 2.025” | 2742 | TB2585K |
| 1B452/003 | 2/0 | 3 | 19 | 3 | 8 | .175” | 2.11” | 3130 | TB2585K |
| 1B454/003 | 4/0 | 3 | 19 | 1 | 8 | .175” | 2.33” | 4385 | TB2592K |
| 1B4525003 | 250 | 3 | 37 | 1/0 | 8 | .175” | 2.450” | 5400 | TB2593K |
| 1B4535003 | 350 | 3 | 37 | 2/0 | 8 | .175” | 2.700” | 6730 | TB2594K |
| 1B4550003 | 500 | 3 | 37 | 4/0 | 8 | .175” | 3.050” | 8515 | TB2595K |