| CONSTRUCTION | |||||||||||
| Conductor: | - Stranded bare copper Class B per ASTM B-3 | ||||||||||
| Insulation: | - Flame-retardant cross-linked polyethylene meeting the requirements for XHHW-2 per UL 44 and the requirements of ICEA S-66-524 for XLPE insulation as standard | ||||||||||
| Assembly: | - Conductors shall be cabled in concentric layers with interstices filled with suitable fillers where necessary - A binder tape (when required) of synthetic material assembles the core in a tight circular configuration |
||||||||||
| Color Code Chart 108: |
|
||||||||||
| Jacket: | - Black sunlight resistant, flame retardant polyvinyl chloride per UL 1277 requirements for Type TC power and control cables | ||||||||||
Applications:
- Used as power and control cables in dry and wet locations
- Can be installed in cable trays, raceways, and open air
- Suitable for exposure to weather, direct burial, and for class 1 Division 2 hazardous locations as per NEC
Standards:
- Can be installed in cable trays, raceways, and open air
- Suitable for exposure to weather, direct burial, and for class 1 Division 2 hazardous locations as per NEC
- UL Type TC, 600 Volt
- UL Type XHHW-2, VW-1 Conductors
- ICEA T-29-520 (210,000 BTU/hr)
- IEEE 1202 (70,000 BTU/hr) / CSA FT4
- IEEE 383 (70,000 BTU)
- UL Subject 1277 (70,000 BTU/hr)
- OSHA Acceptable
- Meets cold bend test of -25*C per UL 1277
- UL Type XHHW-2, VW-1 Conductors
- ICEA T-29-520 (210,000 BTU/hr)
- IEEE 1202 (70,000 BTU/hr) / CSA FT4
- IEEE 383 (70,000 BTU)
- UL Subject 1277 (70,000 BTU/hr)
- OSHA Acceptable
- Meets cold bend test of -25*C per UL 1277
| Part # | AWG Size | No. of Cond. | Nom. Jacket Thick. | Nom. O.D. | Lbs./M’ | Recommended Fitting |
| 1A51003-BWG | 10 | 3 | .045” | .485” | 173 | TCF07554A |