TRAY CABLE, VNTC - PVC Jacket
PVC/Nylon Insulation
90C - 600 Volt - UL Type TC
DuPont Construction
Method 4 Color Code
ER Rated


CONSTRUCTION
Conductor: - Stranded bare copper Class B per UL 83
Insulation: - Extruded polyvinyl chloride to UL requirements for Class THHN and THWN insulation, which with nylon jacket is approved for Type THHN and THWN wires per UL 83
- 14 & 12 AWG - Insulation thickness .015", Nylon thickness .004"
- 10 AWG - Insulation thickness .020", Nylon thickness .005"
Assembly: - The conductors are cabled with fillers where needed to make a round compact core and a suitable tape is applied over the construction
Color Code Chart 108 (Method 4)
Cond. Num. Cond. Marking Cond. Num. Cond. Marking
1 "1" One 2 "2" Two
3 "3" Three 4 "4" Four
Jacket: - Black sunlight resistant, flame retardant polyvinyl chloride per UL 1277 requirements for Type TC power and control cables
Applications:
- Control circuits for operation and interconnection of protective and signaling devices, and for general use in manufacturing, industrial and commercial distribution systems
- UL listed and labeled for installation in ladders, troughs, channels, solid bottom trays and other similar structures (NEC Articles 318 and 340), and in duct, conduit, wireways and all other installations approved for building wire
- In hazardous locations per NEC Articles 500 and 501. May be used in wet or dry locations, sunlight resistant, and suitable for direct burial
Standards:
- UL Type TC, 600 Volt
- NEC Type TFN Conductors
- IEEE 1202 (70,000 BTU/hr) / CSA FT4
- IEEE 383 (70,000 BTU/hr)
- UL Subject 1277 (70,000 BTU/hr)
- OSHA Acceptable
Part # AWG Size No. of Cond. Nom. Jacket Thick. Nom. O.D. Lbs./M’ Recommended Fitting
1A141402* 14 2 .045” .207” x .320” 57  
1A141403 14 3 .045” .370” 79 TCF07540A
1A141404 14 4 .045” .361” 95 TCF07540A
1A141405 14 5 .045” .395” 119 TCF07540A
1A141407 14 7 .045” .439” 152 TCF05054A
1A141409 14 9 .045” .510” 200 TCF05054A
1A141412 14 12 .060” .610” 267 TCF07567A
1A141415 14 15 .060” .636” 325 TCF07567A
1A141419 14 19 .060” .690” 400 TCF07578A
1A141437 14 37 .080” .985” 766 TCF100100A
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.
*ER Rating only applies to 3 conductors or more