TRAY CABLE, PVC Jacket - 600 Volt
PVC/Nylon Insulation - 90°C
UL Type TC - with Ground
ER Rated


CONSTRUCTION
Conductor: - Stranded bare copper Class B per UL 83
Insulation: - Extruded polyvinyl chloride to UL requirements for Class THHN and THWN insulation, which with nylon jacket is approved for Type THHN and THWN wires per UL 83
Ground Conductor: - Stranded bare copper per UL 1277
Assembly: - The conductors are cabled with fillers where needed to make a round compact core and a suitable tape is applied over the construction
Color Code Chart 108:
Cond. Num. Cond. Marking Cond. Num. Cond. Marking
1 "1" One 2 "2" Two
3 "3" Three 4 "4" Four
Jacket: - Black sunlight resistant, flame retardant polyvinyl chloride per UL 1277 requirements for Type TC power and control cables
Applications:
- Control circuits for operation and interconnection of protective and signaling devices, and for general use in manufacturing, industrial, and commercial distribution systems
- U.L. listed and labeled for installation in ladders, trough, channels, solid bottom trays and other similar structures (NEC Articles 318 and 340), and in duct, conduit, wireways and all other installations approved for building wire
- In hazardous locations per NEC Articles 500 and 501. May be used in wet or dry locations, sunlight resistant, and suitable for direct burial
Standards:
- UL Type TC, 600 Volt
- NEC Type THHN/THWN Conductors
- IEEE 1202 (70,000 BTU/hr) / CSA FT4
- ICEA T-29-520 (210,000 BTU/hr)
- IEEE 383 (70,000 BTU/hr)
- UL Subject 1277 (70,000 BTU/hr)
- OSHA Acceptable
- Exposed Run Rated
Part # AWG Size No. of Cond. Grd. Size Nom. Insul. Thick. Nom. Jacket Thick. Nom. O.D. Lbs./M’ Recommended Fitting
1A30804 8 4 10 .036” .060” .655” 338 TCF05067A
1A30604 6 4 8 .036” .060” .760” 504 TCF07578A
1A30404 4 4 8 .048” .080” .985” 824 TCF100100A
1A30204 2 4 6 .048” .080” 1.13” 1197 -
1A30104 1 4 6 .059” .080” 1.28” 1630 TCF150140A
1A31/004 1/0 4 6 .059” .080” 1.41” 1873 TCF150165A
1A32/004 2/0 4 6 .059” .080” 1.49” 2252 TCF150165A
1A33/004 3/0 4 4 .059” .080” 1.56” 2900 TCF150165A
1A34/004 4/0 4 4 .059” .110” 1.82” 3471 TCF200186A
1A325004 250 4 4 .070” .110” 1.98” 4107 TCF200219A
1A335004 350 4 3 .070” .110” 2.24” 5585 4-300TC
1A350004 500 4 2 .070” .110” 2.56” 7694 4-300TC
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.