MEDIUM VOLTAGE POWER CABLE, 15kV
EPR
PE
133% Insulation


CONSTRUCTION
Conductor: - Copper Class B concentric compressed strand
Conductor Shield: - Thermosetting extruded semiconducting shield which is free stripping from the conductor and bonded to the insulation
Insulation: - High quality heat-, moisture-, ozone- and corona-resistant ethylene propylene rubber
Insulation Shield: - Semiconducting extruded thermosetting insulation shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping
Neutral Conductor: - Copper concentric neutral wires
Jacket: - Black, sunlight resistant, linear low density polyethylene encapsulating the neutral wires
- Outer jacket has three extruded red stripes for identification purposes
Applications:
- Underground primary cable for residential and commercial distribution circuits
- Suitable for use in wet or dry locations, installed in underground ducts or direct buried
Standards:
- AEIC CS8
- ICEA S-94-649; T-31-610; T-34-664
Part # AWG Stranding Nominal O.D. Lbs./M’
Insulation Jacket Overall
1/3 NEUTRAL
1MU325001C 250 37 1.06” .050” 1.39” 1623
1MU335001C 350 37 1.16” .050” 1.52” 2132
1MU350001C 500 37 1.29” .080” 1.76” 2976
FULL NEUTRAL
1MU30201C 2 7 .77” .050” 1.08” 789
1MU31/001C 1/0 19 .85” .050” 1.20” 1095
1MU32/001C 2/0 19 .90” .050” 1.28” 1327
1MU34/001C 4/0 19 1.01” .050” 1.41” 1874
Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.