| CONSTRUCTION | |
| 50-2 Loop Detector Lead In: | - Conductor: Stranded Tinned Copper - Insulation: Polyethylene - Shield: Aluminum/Polyester w/ Tinned Copper Drain Wire - Jacket: Polyethylene |
| 51-1 Loop Detector: | - Single Conductor: Stranded Bare Copper - Insulation: PVC - Unshielded - Jacket: PVC/Nylon |
| 51-3 Loop Detector: | - Single Conductor: Stranded Bare Copper - Insulation: Cross-Linked Polyethylene - Unshielded - Jacket: Cross-Linked PE |
| 51-5 Tube Loop Detector: | - Single Conductor: Stranded Bare Copper - Insulation: PVC - Unshielded - Jacket: Nylon loosely encased in a PVC or PE tube |
Applications:
- 50-2 Loop Detector Lead In: For use in signal systems, underground conduit, and in direct burial applications
- Commonly used in loop systems to detect vehicles
- 51-1, 51-3, 51-5 Loop Detector: For use in traffic signal systems for vehicle detection and traffic flow
- Commonly used in loop systems to detect vehicles
- 51-1, 51-3, 51-5 Loop Detector: For use in traffic signal systems for vehicle detection and traffic flow
| Part # | IMSA Item | AWG Size | Stranding | Number of Cond. | Nom. O.D. | Lbs./M’ |
| 1LD502122 | 50-2 | 12 | 19 | 2 | .369” | 83 |
| 1LD502142 | 50-2 | 14 | 19 | 2 | .323” | 59 |
| 1LD502162 | 50-2 | 16 | 19 | 2 | .295” | 42 |
| 1LD502182 | 50-2 | 18 | 7 | 2 | .265” | 33 |
| 1LD511141 | 51-1 | 14 | 7 | 1 | .113” | 18 |
| 1LD513121 | 51-3 | 12 | 7 | 1 | .152” | 30 |
| 1LD513141 | 51-3 | 14 | 7 | 1 | .133” | 21 |
| 1LD515121 | 51-5 | 12 | 19 | 1 | .250” | 40 |
| 1LD515141 | 51-5 | 14 | 19 | 1 | .250” | 31 |